AVR ISP Boot-loader Burning Programmer Shield

Detail about AVR ISP Boot-loader Burning Programmer Shield

Description

This is a shield expansion programmer that allows your Ar dupplane to modify fuse bits and burn the bootloader to
an external chip and other Ar dupboards.

An on-board buzzer and LED indicator indicating whether combustion is successful is convenient for Ar duboard
designers for batch burning. According to the open smart user manual, it is very easy to use.

Features

- Compatibility: since it uses the SPI pins of the ICSP interface, compatible with UNO R3 / Mega2560, it can change
to a burner loader when it is directly connected to two boards.

- Operating voltage: 5 V

- Working current: 500mA (max)

- Ar duction board: support UNO R3 / Mega2560 / Nano / pro mini (5 V 16 M)

- On-board buzzer, if the fuse bit is successfully changed, it will sound once, and then, if the burning bootloader
is in order, it will sound again. If these are not two beeps, a burning failure. You can capture the sound
instead of the LED light, this way it will increase the burning efficiency.

- On-board LED indicator, heart rate LED lamp, like a breathing lamp when the power is normal. During programming,
the prog indicator flashes until it finishes. If programming does not work, the error indicator (red) will be a
lamp.

- Onboard 28P Lock Place for Atmega328P, Atmega168P, Atmega8 Combustion Loader

- Built-in interface ISP_6PIN, for external Ar duboard bootloader burning

- Built-in interface ISP_10PIN

- On-board FT232RL and CH340G USB to TTL programmer interface for downloading code to a chip on a 28P seat lock.